by clicking the arrows at the side of the page, or by using the toolbar.
by clicking anywhere on the page.
by dragging the page around when zoomed in.
by clicking anywhere on the page when zoomed in.
web sites or send emails by clicking on hyperlinks.
Email this page to a friend
Search this issue
Index - jump to page or section
Archive - view past issues
Concrete In Australia : September 2013
Concrete in Australia Vol 39 No 3 61 REFERENCES 1. Oehlers, D.J., Seracino, R. and Smith, S.T., "Design Handbook for RC Structures Retrofitted with FRP and Metal Plates: Beams and Slabs", HB 305-2008, Standards Australia, Australia, 2008. 2. Smith, S.T., Zhang, H.W. and Wang, Z.Y. "Influence of FRP anchors on the strength and ductility of FRP- strengthened RC slabs", Construction and Building Materials, Special Issue on Ductility of Civil Engineering Structures Incorporating FRPs, 2013, doi: 10.1016/j. conbuildmat.2013.02.006. 3. Kalfat, R., Al-Mahaidi, R. and Smith, S.T., "Anchorage devices used to improve the performance of concrete structures retrofitted with FRP composites: A-state-of-the- art review", Journal of Composites for Construction, ASCE, 17(1), 2013, pp 14-33. 4. Zhang, H.W., Smith, S.T. and Kim, S.J., "Optimisation of carbon and glass FRP anchor design", Construction and Building Materials, Special Issue on Strengthening and Retrofitting of Concrete Structures with Fiber Reinforced Polymer Material, 32, 2012, pp 1-12. 5. Zhang, H.W., "Influence of FRP Anchors on FRP-to- Concrete Bonded Interfaces", PhD Dissertation, e University of Hong Kong, China, 2013. Figure 1. FRP anchor: (a) Schematic of FRP anchor, (b) FRP-to-concrete joint test set-up (4). Figure 2. Generic load-slip response of FRP-to-concrete joints with and without anchor (4). Anchor Fans (bow-tie) Anchor Dowel Plate Concrete (a) (b)