by clicking the arrows at the side of the page, or by using the toolbar.
by clicking anywhere on the page.
by dragging the page around when zoomed in.
by clicking anywhere on the page when zoomed in.
web sites or send emails by clicking on hyperlinks.
Email this page to a friend
Search this issue
Index - jump to page or section
Archive - view past issues
Concrete In Australia : September 2013
44 Concrete in Australia Vol 39 No 3 Davidovits, J. 1991. Geopolymers- Inorganic polymeric new materials. Journal of ermal Analysis, Vol.37, pp. 1633- 1656. Davidovits, J. 1994. High-alkali cements for 21st century concretes. In: Concrete Technology Past, Present and Future (P.K.Mehta, editor). Proc. of V. Mohan Malhotra Symposium, ACI SP 144, pp. 383-397. Duxson, P., Lukey, G.C., Separovic, F. and Van Deventer, J.S.J. 2005. Effect of alkali cations on aluminium incorporation in geopolymeric gels. Industrial Engineering Chem. Res., Vol. 44 (4), pp. 832-839. Duxson, P., Fernandez-Jimenez, A., Provis, J.L., Lukey, G.C., Palomo, A., van Deventer, J.S.J. 2007a. Geopolymer technology: the current state of the art. J. Mater. Sci., Vol. 42, pp. 2917-2933. Duxson, P., Provis, J.L., Lukey, G.C. and van Deventer, J.S.J. 2007b. e role of inorganic polymer technology in the development of green concrete , Cement and Concrete Research, Volume 37 (12), pp. 1590-1597. García-Lodeiro, I., Palomo, A. and Fernández-Jiménez, A. (2007). Alkali--aggregate reaction in activated fly ash systems. Cement and Concrete research, Vol. 37, 175-183. Habert, G., d Espinose de Lacaillerie, J.B. and Roussel, N. 2011. An environmental evaluation of geopolymer-based concrete production: reviewing current research trends. Journal of Cleaner Production, Vol. 19, pp.1229-1238. Hardjito, D., Wallah, S.E. and Rangan, B.V. (2002), "Research into engineering properties of geopolymer concrete", Geopolymers 2002, Melbourne, October 28-29, 2002. 11 pages. Hardjito, D., Wallah, S.E., Sumajouw, D.M.J., Rangan, B.V. 2004a. On the development of fly ash-based geopolymer concrete. ACI Materials Journal, Vol. 101 (6), pp. 467-472. Hardjito, D., Wallah,S.E., Sumajouw, D.M.J. and Rangan, B.V. 2004b. Properties of geopolymer concrete with fly ash as source material: Effect of mixture composition. Proc. 7th CANMET/ACI Int. Conf., SP-222, (V.M. Malhotra, editor), pp109-118. Kobera, L., Slavík, R., Koloušek, D., Urbanová, M., Kotek, J. and Brus, J. 2011. Structural stability of aluminosilicate inorganic polymers: Influence of the preparation procedure. Ceramics-Silikáty, 55 (4) pp. 343-354. Kupwade-Patil, K. And Allouche, E.N. (2013). Impact of alkali silica reaction on fly ash-based geopolymer concrete. Journal of Materials in Civil Engineering, Vol. 25, pp. 131-139. Lee, W.K.W.and van Deventer J.S.J. 2002a. e effects of inorganic salt contamination on the strength and durability of geopolymers. Colloids and Surfaces A: Physiochemical Engineering Aspects, Vol. 211, pp. 115-126. Lee, W.K.W. and van Deventer, J.S.J. 2002b. e effect of ionic contaminants on the early- age properties of alkali-activated fly ash-based cements. Cement and Concrete Research, Vol. 32, pp. 577-584. Lee, W.K.W., van Deventer, J.S.J. 2004. e interface between natural siliceous aggregates and geopolymers. Cement and Concrete Research, Vol. 34 (2), pp. 195-206. Lee, W.K.W., van Deventer, J.S.J. June 2007. Chemical interactions between siliceous aggregates and low-Ca alkali- activated cements. Cement and Concrete Research, Vol. 37 (6), pp. 844-855. McLellan, B.C., Williams, R.P., Lay, J., Van Riessen, A. and Corder, G.D. 2011. Costs and carbon emissions for geopolymer pastes in comparison to ordinary OPC. Journal of Cleaner Production, Vol. 19, pp.1080-1090. Provis, J.L., Lukey, G.C. and Van Deventer, J.S.J. 2005a. Do geopolymers actually contain nano-crystalline zeolite? A re- examination of existing results. Chemistry of Materials, Vol. 17 (12), pp. 3075-3085. Puertas, F., Palacios, M., Gil-Maroto, A. and Vázquez, T. (2009). Alkali-aggregate behaviour of alkali-activated slag mortars: Effect of aggregate type, Cement and concrete Composites, Vol. 31, pp. 277-284. Shayan, A 1994, Suitability of two rapid test methods for determining the Alkali-reactivity of sands , Int. Journal of Cement and Concrete Composites, vol.16, pp.177-88. Shayan, A. and Xu, A. (2010), Testing Geopolymer concrete -- Retaining Walls at Swan St. Bridge over the Yarra River. Contract Report No. 001959, ARRB Group Pty Ltd. Shayan, A. and Xu, A. (2012). Monitoring of Swan Street Bridge. ARRB Contract Report 004352, May 2010, 12pp. Sklepic, P. 2011. Rehabilitation of the Swan Street Bridge Alexandra Avenue abutment. 4th Australian Small Bridges Conference, Melbourne Victoria, Australia, 14 pp. Stengel, T., Reger, J. and Heinz, D. 2009. Life cycle cost assessment of geopolymer concrete -- what is the environmental benefit? Concrete Solutions 09 , Proc. of the 24th Biennial Conference, Concrete Institute of Australia, 17-19 Sept 2009, Sydney, Australia, Paper 6a-4. Steveson, M. and Sagoe-Crentsil, K. 2005a. Relationships between composition, structure and strength of inorganic polymers. Part 1. Metakaoloin-derived inorganic polymers. Journal of Materials Science, Vol. 40, pp. 2023-2036. Steveson, M. and Sagoe-Crentsil, K. 2005b. Relationships between composition, structure and strength of inorganic polymers. Part 2. Fly ash-derived inorganic polymers. Journal of Materials Science, Vol. 40, pp. 4247-4259. Turner, L. and Collins, F. (2012), "Geopolymers: a greener alternative to OPC?", Concrete in Australia, Vol.38, No.1, pp.49-56. Van Deventer, J.S.J., Provis, J.L., Duxson, P. and Lukey, G.C. (2007). Reaction mechanisms in the geopolymeric conversion of inorganic waste to useful products. Journal of Hazardous Materials A139, pp. 506-513. Van Deventer, J.S.J., Provis, J.L. and Duxson, P. 2012. Technical and commercial progress in the adoption of geopolymer cement. Minerals Engineering, Vol. 29, pp. 89-104. Weng, L., Sagoe-Crentsil, K., Brown, T. and Song, S. 2005. Effects of aluminates on the formation of geopolymers. Materials Science and Engineering B, Vol. 117, pp. 163- 168.