by clicking the arrows at the side of the page, or by using the toolbar.
by clicking anywhere on the page.
by dragging the page around when zoomed in.
by clicking anywhere on the page when zoomed in.
web sites or send emails by clicking on hyperlinks.
Email this page to a friend
Search this issue
Index - jump to page or section
Archive - view past issues
Concrete In Australia : September 2013
Concrete in Australia Vol 39 No 3 23 Technical program at a glance Wednesday 16 October 2013 08:00-17:30 Registration 09:15-09:45 Opening Session 09:45-10:30 Plenary Session I: Keynote Speaker: Dr Andy Davids Design and Construction of the Current Tallest Buildings in the World -- Lessons for the Next Generation 10:30-11:00 Morning Tea and Exhibition 11:00-12:30 SESSION 1A Structures Research and Applications SESSION 1B Concrete Performance at Elevated Temperatures SESSION 1C Durability 11:00-11:20 Prof. Stephen J. Foster 1A-1: Calibration of Reinforced Concrete Structures Standard AS3600-Part I: Statistical Analysis of Material Properties and Model Error Dr Faiz U.A. Shaikh 1C-1: Corrosion Durability of Geopolymer Concretes Containing Different Concentrations of Alkaline Solution 11:20-11:40 Prof. Mark G Stewart 1A-2: Calibration of Reinforced Concrete Structures Standard AS3600-Part II: Reliability Indices and Changes to Capacity Reduction Factors Mr James M. de Burgh 1B-2: Fire induced Spalling of Reinforced or Prestressed Concrete - Overview and Initial Numerical Investigation Mr B. Tom Benn 1C-2: Chloride Ion Ingress of Concrete -- the Influence of Increased Levels of Limestone Mineral Addition 11:40-12:00 Mr Sing-Siu Michael Lee 1A-3: Sustainable Composite Beam Behaviour with Deconstructable Bolted Shear Connectors-Full scale Experimental Investigation Mr A.Q. Sobia 1B-3: The Effect of Elevated Temperature on HAC- based THPCC with GGBS Addition Mr Laurence Aldridge 1C-3: Service Life of Concrete during Chloride Ingress 12:00-12:20 Mr Huigyeong Kim 1A-4: Investigating the Structural Behaviour of Concrete Filled 'CAN' Under Axial Loading 1B-4: TBC Mr Fred Andrews-Phaedonos 1C-4: Use of Corrosion Monitoring Sensors to Monitor the In-Situ Performance and Intervention needs in Reinforced Concrete Structures 12:20-12:30 10-minute Q&A 10-minute Q&A 10-minute Q&A 12:30-13:30 Lunch and Exhibition 13:30-15:00 SESSION 2A Structures Research and Applications SESSION 2B Construction Methods SESSION 2C Concrete Materials and Performance 13:30-13:50 Prof. Mark A. Bradford 2A-1: Structural Modelling of Pavement Upheaval Buckling Mr Reuben F. Barnes 2B-1: Unique Ultrasonic Testing System for the Inspection and Diagnosis Concrete Defects and Embedments Prof. Peter Waldron 2C-1: Re-using Steel Wire from Tyres for Fibre Reinforced Concrete 13:50-14:10 Mr Vincent CW Lee 2A-2: Three-dimensional Concrete Structure-Soil Interactive Effects Mr Bassam Matty 2B-2: Cockburn Gateway Stage 3 -- Top-Down Construction Dr Rasiah Sri Ravindrarajah 2C-2: Quality Assurance for Railway Shotcreting 14:10-14:30 Mr Brendan Cassels 2A-3: Design of Ground Bearing Trackform for the Gold Coast Light Rail, QLD, Australia Mr Harun Meer 2B-3: Non-destructive Evaluation of Defects in Reinforced Concrete Using Ground Penetrating Radar (GPR) Mr Marcin Wieloch 2C-3: Self-Compacting Concrete Use in Bridge Transfer Beams 14:30-14:50 Mr Claus Rotstein 2A-4: Finite Element Modelling of Ventilation Control Devices for Underground Coal Mines using Engineered Cementitious Composites Mr Saeko Tokuomi 2B-4: An Impact Acoustic System for Concrete-Wall- Climbing Robots -Impact Acoustic System for Rising Cross II- Mr Stuart Curtis 2C-4: Concrete Placing Practice for Durability in Concrete Structures (Adapting Yesterday's Skills for Tomorrow's Challenges) 14:50-15:00 10-minute Q&A 10-minute Q&A 10-minute Q&A 15:00-15:30 Afternoon Tea and Exhibition 15:30-17:20 SESSION 3A Geopolymer Concrete SESSION 3B Precast Concrete SESSION 3C Major Projects/ Case Studies 15:30-15:50 Dr David W. Law 3A-1: Properties of Brown Coal Fly Ash Geopolymer Mortars Mr Rod Bligh 3B-1: Development of Geopolymer Precast Floor panels for the Global Change Institute at University of Queensland Mr Liam Donnelly 3C-1: Concrete Challenges on the Superway 15:50-16:10 Mr Pradip Nath 3A-2: Development of Fly Ash Based Geopolymer Concrete for Ambient Curing Condition Mr Mosleh Tohidi 3B-2: An Improved Tie Force Method for Progressive Collapse Resistance Design of Precast Concrete Cross Wall Structures Mr Joyce Lee 3C-2: The Design of Eclipse Tower, Parramatta 16:10-16:30 Dr James M Aldred 3A-3: Engineering Properties of a Proprietary Premixed Geopolymer Concrete Mr Geoff. Barker 3B-3: Concrete in Remote Housing Construction: Precast Concrete Slabs and Other Applications Mr Joseph Donohue 3C-3: Design and Construction Issues of the Soft-Eye Headwall for Brisbane AirportlinkM7's 12.48m Diameter Tunnel Boring Machines 16:30-16:50 Mr Partha Sarathi Deb 3A-4: Sulphate Resistance of Slag Blended Fly Ash Based Geopolymer Concrete Mr Craig Mills 3C-4: New Farm RiverWalk Replacement 16:50-17:10 Mr Yifei Cui 3A-5: Bond Performance of Steel Bar and Fly Ash Based Geopolymer Concrete 3B-5: TBC Mr Fred Andrews-Phaedonos 3C-5: Performance of Epoxy Coating on Columns Exposed to Aggressive Tidal Marine Conditions 17:10-17:20 10-minute Q&A 10-minute Q&A 10-minute Q&A 18:30-20:30 Welcome Reception in any other forum on concrete in Australia. It is a major event and a vitally important event for the CIA, and I urge all members to get behind it, support it and attend to ensure that is continues to occupy its rightful position as the pre-eminent event on concrete in Australia." Further conference details and registration information can be found on www.concrete2013.com.au. Conference Managers: Arinex Pty Limited Suite 3, e Precinct, 12 Browning Street West End, QLD 4101 Ph: +61 7 3226 2800 Fax: +61 7 3226 2899 Email: firstname.lastname@example.org Website: www.concrete2013.com.au